Product Description

-testing oil dielectric voltage
-Good performance of anti-jamming and high precision
-output voltage up to 100kV
-meet IEC156

NEW DESIGN fully automatic inslation oil tester machine

IIJ-II series fully automatic oil tester is applied to test the insulating oil's dielectric strength, which is designed on the requirement of IEC156 Testing Method of Insulation Oil Medium Strength, which via proper programming, got functions of auto boosting, step down, stirring, display and print out.

Advantage:

1. After breakdown of oil medium, HV break off will operate within 10 seconds to enable an auto isolation of control system partly; This effectively safeguards the personnel and equipment safety.
2. It adopts industrial single plate integrated circuit, new-style I/O connecting cup, unique inspection, anti-jamming technology and industrial SCM which is applied to integrate circuit, particular testing and anti-jamming technology, which is largely improved the machine's capacity.

Parameter data:

1. Power supply: AC220V ± 10%, 50 HZ
2. Output voltage: 60 kV, 80 kV, 100 kV (100 kV should be specially designed)
3. Capacity: 1.2 KVA (for 60kV), 1.6 KVA (for 80 kV), 2.0 KVA (for 100 kV)
4. Pressure increase speed: About 2 KV/S
5. Voltage inspection accuracy: 3%
6. Dielectric strength sensitivity: <2KV
7. Wave from distortion: < 3%
8. Breakdown response time: <10ms
9. Polar distance: 2.5mm
10. Working environment: Temperature: 0 to 40 º C, humidity: < 85% (Relative Humidity)
11. Storage environment: Temperature: -20 to 60 º C, humidity: < 75% (Relative Humidity)
12. Working Altitude: < 1500 meters (If over 1500m, it can be customized)

Test equipment
1. Transformer oil Breakdown voltage Tester ( BDV test kit) series IIJ-II
2. Acidity tester model ACD-3000I
3. Karl Fischer Water content Tester Model TP-6A / model TP-2100
4. Fully automatic Interfacial Tension Analyzer model IT-800
5. Gas-Chromatography transformer oil gas analyzer model DGA2013-1
6. Multi-functional Vibration tester model TYD-2000
7. Automatic Freezing Point & Pour Point Tester model PT-2000
8. Kinematic Viscosity tester model VST-8 /model VST-2000
9. Flash point tester (open cup) model TPO-3000
10. Flash point tester (close cup) model TPC-3000
11. TAN-DELTA TESTER, 10kV Capacitance and Dissipation Factor Test Set model CDEF
12. Automatic Freezing Point & Pour Point Tester model TP-501Z
13. Determination of foaming characteristic of lubricating oil model SD-12579
14. Earth resistance tester model HYDW-II
15. Coil Resistance Tester (TPZC-40)
16. CT/PT tester model TPVA-404
17. Transformer turn ratio tester model HYG-II
18. Relaying Protection Tester model TPJB-III
19. Digital Grounding Resistance Tester model TP2571-II
20. DC High Voltage Generator model ZGF
21. Underground water/gold detector model TP-UWD